The Basic Ordering Numbers and Dimensions tables (pages 7-9) contain only the most popular valve confi gurations; many more are available. If the required valve confi guration is not in the Basic Ordering Numbers and Dimensions tables, use the chart below to build part numbers for quotation purposes.
|(basic ordering number)||(optional)|
|D||Duolok Tube Fitting|
|U||Unilok Tube Fitting|
|G||Griplok Tube Fitting|
|MRT||Male ISO Tapered|
|FRT||Female ISO Tapered|
|MST||Male SAE Straight|
|FST||Female SAE Straight|
|S||Male O-ring Face Seal (SAE J1453)|
|SS||Female O-ring Face Seal (SAE J1453)|
|-316||316 Stainless Steel|
Oxygen compatible lubricant, per ASTM G93,
Level C and CGA G-4.1
|-FP6||#6 SAE Female Bottom Port|
Add options designators to the end of the Base Part Number in alphabetical order.
Tube end and O-ring face seal connection part numbers are formatted “Type” followed by “Size.”
Example: D6 or SS6. Pipe end connections are formatted “Size” followed by “Type.” Example: 6PF.
Low temperature Nitrile O-rings are standard on LTB and LHTB series valves. 4 HTB and LHTB series valves are only available with PEEK seats
Duolok®, Unilok®, Griplok® and TruFit® are registered trademarks of SSP Corp. Expanite® is a registered trademark of Expanite, Inc. Swagelok® is a registered trademark of The Swagelok Company Parker CPITM is a trademark of Parker-Hannifin Corp. Gyrolok® is a registered trademark of Hoke Inc. Chemraz® is a registered trademark of Greene, Tweed & Co. Kalrez is a registered trademark of E.I. du Pont de Nemours and Company
IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE PERSONAL INJURY AND PROPERTY DAMAGE.
It is the sole responsibility of the system designers and users to properly select and use products for their specifi c applications. This document has been provided to users with technical expertise as a reference for further investigation to determine specifi c product needs relative to their design requirements.
TB series ball valves should only be used in the full on or full off position. Throttling may damage the valve.
All TB Series valves are factory tested with Nitrogen to 1000 psig (69 bar) at 70°F (20°C).
FloLok valves are backed by the SSP Limited Life Time Warranty. This warranty is available from your local distributor or at www.mySSPusa.com.