The Basic Ordering Numbers and Dimensions tables (pages 7-9) contain only the most popular valve confi gurations; many more are available. If the required valve confi guration is not in the Basic Ordering Numbers and Dimensions tables, use the chart below to build part numbers for quotation purposes.
|(basic ordering number)||(optional)|
|41||0.093, 0.053* in.|
|L||2 Way Sample Transfer|
|DP||2 Way Drain / Purge Angle|
|XQS||Quarter Turn Switching|
|XTF||3 Way Tee Flow|
3 Way Tee Flow Switching
See Instructions on Page 12
See Vent Size options.
|D||Duolok Tube Fitting|
|U||Unilok Tube Fitting|
|G||Griplok Tube Fitting|
|MRT||Male ISO Tapered|
|FRT||Female ISO Tapered|
|-316||316 Stainless Steel|
|-XP98||Oxygen compatible lubricant, per ASTM G93, Level C and CGA G-4.1|
Note: For vented valves indicate V in the base part number. See D.
See instruction for selecting vent sizes on Page 10.
1. Add options designators to the end of the Base Part Number in alphabetical order.
2. Tube end connection part numbers are formatted “Type” followed by “Size.” Example: D6.
Pipe end connections are formatted “Size” followed by “Type.” Example: 6PF
*1/16 tube fitting end connections reduce the opening to 0.052 in.
Duolok®, Unilok®, Griplok® and TruFit® are registered trademarks of SSP Corp. Expanite® is a registered trademark of Expanite, Inc. Parker CPITM is a trademark of Parker-Hannifin Corp. Hoke® and Gyrolok® is a registered trademark of Hoke Inc. Chemraz® is a registered trademark of Greene, Tweed & Co. Kalrez is a registered trademark of E.I. du Pont de Nemours and Company
IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE PERSONAL INJURY AND PROPERTY DAMAGE.
It is the sole responsibility of the system designers and users to properly select and use products for their specifi c applications. This document has been provided to users with technical expertise as a reference for further investigation to determine specifi c product needs relative to their design requirements.
EB series ball valves should only be used in the full on or full off position. Throttling may damage the valve.
Packing adjustments are required for applications with working pressure higher than 1000 psig (69 bar) or if the valves have been exposed to high or low temperatures prior to installation. Instructions for packing adjustments are included with each valve.
Valves that have not been actuated for extended periods of time may require greater actuation torque.
All EB series valves are factory tested with Nitrogen to 1000 psig (69 bar) at 70°F (20°C). Note: Packing adjustments are required for applications with higher pressures and in applications with higher or lower process or environmental temperature.
FloLok valves are backed by the SSP Limited Life Time Warranty. This warranty is available from your local distributor or at www.mySSPusa.com.